Are you ready to finish this?
WHAT YOU NEED:
- Two (2) main quilted pieces, one with the pocket attached (from Part 1)
- 22″-24″ zipper
- Corded Handles (optional)
STEP 1: Attach the Zipper
Once you have the zipper pinned in place, use your zipper foot to carefully stitch in place.
Take extra time sewing around the corners. You may need to maneuver the fabric a bit as you work through this section.
Flip the zipper back, use a pair of small scissors and clip any excess fabric away from the back of the zipper in the corners.
Sew in place using your zipper foot. Remember, take your time with those corners…this time it is going to be a bit more tricky….
Find the center of the top of your case. Measure out from the center 2″ on both sides and down 3/4″. Mark with a pencil.
Place the inner corners of your handle edges on those marks and pin in place. NOTE: The back of the handles will be facing UP and the curve of the handle will for a “U” shape.